Robertshaw 9515 Manuel d'utilisateur

IMPORTANT SAFETY INFORMATIONWARNING:• Always turn off power at the main power source by unscrewingfuse or switching circuit breaker to the off positio

10Wiring DiagramsThe following is just a sample of the most common types of HVAC systems. Refer to your system’s installation manual for wiring inform

Five Year Limited WarrantyMaple Chase Company warrants to the original contractor installer, orto the original consumer user, each new Maple Chase the

Features• Multi stage heating and cooling control• Zone system compatible as a master thermostat• Auxiliary heat• Fahrenheit/Celsius display option• A

4. After labeling wires, remove wires from terminals.5. Remove existing thermostat base from wall.6. Refer to the following section for instructions o

5. Place thermostat against the wall at desired location. Make surewires will feed through opening on base of thermostat. 6. Mark placement of mountin

11. Connect wires to terminal strip (refer to wiring diagrams). Make sure wire connections are secure.12. Set the °F/°C switch to either °F for Fahren

OperationSetting or Changing the Setpoint Temperature1. Press either the or button. The display will show the current temperature setpoint.2. Press

7To Test ThermostatWARNING: DO NOT SHORT (JUMPER) ACROSS TERMINALS OF GAS VALVE OR SYSTEM CONTROL TO TEST OPERATION. THIS WILL DAMAGE THE THERMOSTAT A

Changing Fahrenheit (F) to Celsius (C)The thermostat is preset to display the temperature in degrees Fahrenheit.You may change the display readout to

If problems with thermostat cannot be solved, call: Technical Support: (800) 445-8299 Monday-Friday 7:30-5:30 CST For warranty returns, send thermosta